|
|
| Line 1: |
Line 1: |
| '''Particle image velocimetry''' ('''PIV''') is an [[optical]] method of [[flow visualization]] used in education<ref name="Httpwwwinteractiveflowscomdownloads">[http://www.interactiveflows.com/downloads/ Interactive Flow Studies - Downloads<!-- Bot generated title -->]</ref> and research.<ref name="Httpwwwlavisionde">[http://www.lavision.de/ LaVision - We count on photons<!-- Bot generated title -->]</ref><ref name="Httpwwwtsicomenindexaspx">http://www.tsi.com/en-1033/index.aspx</ref><ref name="Httpwwwdantecdynamicscom">[http://www.dantecdynamics.com/ Dantec Dynamics - laser optical measurement systems sensors<!-- Bot generated title -->]</ref> It is used to obtain instantaneous [[velocity]] measurements and related properties in [[fluid]]s. The fluid is [[seeding (fluid dynamics)|seeded]] with tracer [[Particle (ecology)|particle]]s which, for sufficiently small particles, are assumed to faithfully follow the [[Fluid dynamics|flow]] [[Dynamics (mechanics)|dynamics]] (the degree to which the particles faithfully follow the flow is represented by the [[Stokes number]]). The fluid with entrained particles is illuminated so that particles are visible. The motion of the seeding particles is used to calculate speed and direction (the [[vector field|velocity field]]) of the flow being studied. | | Second, don't think of your body as individual bodyparts. During this, you are advised to take Clomid or Nolvadex along with h - CG to avoid a strong crash that mainly occurs because of hormonal imbalance in the body. The exercise routine should focus primarily on weight training since building muscle will actually allow them to burn more fat. These water filtering devices give your water a PH balance of 7. You will never build the muscles you want to by doing shoulder shrugs and leg extensions. <br><br>The muscle building supplements work is explained by Kyle Leon Muscle Maximizer. Pull out the stops and run fast during the final third of your workout. Tips on creating clay sculptures, making beaded jewelry, and using needle and thread to create simple decorations are included. It helps in lowering cholesterol levels and reducing the rate of heart diseases. Each individual will vary on how much weight they will gain. <br><br>what you hope to look like in the not-too-distant future. Carbohydrates are your friend when striving to build muscle mass. The martial artist will only be increasing their body mechanics and endurance of their muscles. ' Early exposure to music, rhythm and movement help children develops language and math skills. Lean red meats, fish, poultry, and eggs can be the perfect samples of protine. <br><br>The more time your baby spends on her stomach, the more opportunities she’ll have to hold up her head and chest, which strengthen the muscles she’ll need for sitting. The issue using this type of technique is, bulking up would make you acquire apparent amounts of excess fat even if you you could develop muscle effectively through the higher caloric intake. If you said yes, you'll need to make some gear investments. Sleeping is actually as significant as resistance training, and ingesting a smart diet regime is the most vital of all. Keep a journal of your workouts to record your progress. <br><br>You will need this energy to give your workout your all. Healthy fats are needed to absorb fat soluble vitamins A and E. Strength training should be done 2 to 3 times per week, with cardiovascular exercises being done every day that strength training isnt or for a short time at the end of each workout. It may seem silly, but you can tighten, tone, and even build chest muscle fast without heading to the gym. Your muscles will build and repair at during good quality sleep. <br><br>Protein is your friend-you have to eat protein if you want to build muscle, bottom line. Next putting your hands onto two chairs perform the last set of chest exercises then on the chin up bar taking wide grip so your hands are past your shoulders. ) However, that's only an estimate since the technology to accurately measure cell count does not exist--yet. If you don't get a smart night's sleep you'll feel it mentally the next day. Weight lifting less allows for maximum natural muscle regeneration.<br><br>If you beloved this post and you would like to receive additional information with regards to [http://www.albissola.info/ supplements to gain muscle] kindly stop by our web site. |
| | |
| Other techniques used to measure flows are [[laser Doppler velocimetry]] and [[hot-wire anemometry]]. The main difference between PIV and those techniques is that PIV produces two dimensional or even three dimensional [[vector field]]s, while the other techniques measure the velocity at a point. During PIV, the particle [[concentration]] is such that it is possible to identify individual particles in an image, but not with certainty to track it between images. When the particle concentration is so low that it is possible to follow an individual particle it is called [[Particle tracking velocimetry]], while [[Laser speckle velocimetry]] is used for cases where the particle concentration is so high that it is difficult to observe individual particles in an image.
| |
| | |
| Typical PIV apparatus consists of a [[camera]] (normally a [[digital camera]] with a [[Charge-coupled device|CCD chip]] in modern systems), a strobe or [[laser]] with an optical arrangement to limit the physical region illuminated (normally a [[cylindrical lens]] to convert a light beam to a line), a [[synchronizer]]{{dn|date=August 2012}} to act as an external trigger for control of the camera and laser, the seeding particles and the fluid under investigation. A [[fiber optic cable]] or liquid light guide may connect the laser to the lens setup. PIV software is used to post-process the optical images.<ref>{{cite web|title=MatPIV|url=http://folk.uio.no/jks/matpiv/}}</ref>
| |
| | |
| ==History==
| |
| While the method of adding particles or objects to a fluid in order to observe its flow is likely to have been used from time to time through the ages no sustained application of the method is known. The first to use particles to study fluids in a more systematic manner was [[Ludwig Prandtl]], in the early 20th century.
| |
| | |
| [[Laser Doppler Velocimetry]] predates PIV as a laser-digital analysis system to become widespread for research and industrial use. Able to obtain all of a fluid's velocity measurements at a specific point, it can be considered the 2-dimensional PIV's immediate predecessor. PIV itself found its roots in [[Laser speckle velocimetry]], a technique that several groups began experimenting with in the late 1970s. In the early 1980s it was found that it was advantageous to decrease the particle concentration down to levels where individual particles could be observed. At these particle densities it was further noticed that it was easier to study the flows if they were split into many very small 'interrogation' areas, that could be analyzed individually to generate one velocity for each area. The images were usually recorded using [[Analog photography|analog]] [[camera]]s and needed immense amount of computing power to be analyzed.
| |
| | |
| With the increasing power of computers and widespread use of [[Charge-coupled device|CCD]] cameras, digital PIV has become increasingly common, to the point that it is the primary technique today.
| |
| | |
| ==Equipment and apparatus==
| |
| ===Seeding particles===
| |
| [[File:PIV through stagnation flame.jpg|thumb|Application of PIV in combustion]]
| |
| The [[Seeding (fluid dynamics)|seeding]] [[Particle (ecology)|particles]] are an inherently critical component of the PIV system. Depending on the fluid under investigation, the particles must be able to match the fluid properties reasonably well. Otherwise they will not follow the flow satisfactorily enough for the PIV analysis to be considered accurate. Ideal particles will have the same density as the fluid system being used, and be spherical (these particles are called [[microspheres]]). While the actual particle choice is dependent on the nature of the fluid, generally for macro PIV investigations they are [[glass]] beads, [[polystyrene]], [[polyethylene]], [[aluminum]] flakes or [[oil]] droplets (if the fluid under investigation is a [[gas]]). Refractive index for the seeding particles should be different from the fluid which they are seeding, so that the laser sheet incident on the fluid flow will reflect off of the particles and be scattered towards the camera.
| |
| | |
| The particles are typically of a diameter in the order of 10 to 100 micrometers. As for sizing, the particles should be small enough so that [[Latency (engineering)|response time]] of the particles to the motion of the fluid is reasonably short to accurately follow the flow, yet large enough to [[scattering|scatter]] a significant quantity of the incident laser light. For some experiments involving combustion, seeding particle size may be smaller, in the order of 1 micrometer, to avoid the quenching effect that the inert particles may have on flames. Due to the small size of the particles, the particles motion is dominated by [[stokes' law|stokes drag]] and [[settling]] or rising affects. Approximating the particles as spherical particles ([[microspheres]]) of very low [[Reynolds number]], then the ability of the particles to follow the fluid's flow is directly proportional to the difference in [[density]] between the particles and the fluid and directly proportional to the square of the particles' diameters. The scattered light from the particles is dominated by [[Mie scattering]] and so is also proportional to the square of the particles' diameters. Thus the particle size needs to be balanced to scatter enough light to accurately [[flow visualization|visualize]] all particles within the laser sheet plane but small enough to accurately follow the flow. | |
| | |
| The seeding mechanism needs to also be designed so as to seed the flow to a sufficient degree without overly disturbing the flow.
| |
| | |
| ===Camera===
| |
| To perform PIV analysis on the flow, two [[Exposure (photography)|exposures]] of laser light are required upon the [[camera]] from the flow. Originally, with the inability of cameras to capture multiple [[photograph|frames]] at high speeds, both exposures were captured on the same frame and this single frame was used to determine the flow. A process called [[autocorrelation]] was used for this analysis. However, as a result of autocorrelation the direction of the flow becomes unclear, as it is not clear which particle spots are from the first pulse and which are from the second pulse. Faster [[digital camera]]s using [[charge-coupled device|CCD]] or [[CMOS]] chips were developed since then that can capture two frames at high speed with a few hundred ns difference between the frames. This has allowed each exposure to be isolated on its own frame for more accurate [[cross-correlation]] analysis. The limitation of typical cameras is that this fast speed is limited to a pair of shots. This is because each pair of shots must be transferred to the computer before another pair of shots can be taken. Typical cameras can only take a pair of shots at a much slower speed. High speed CCD or CMOS cameras are available but are much more expensive.
| |
| | |
| ===Laser and optics===
| |
| For macro PIV setups, [[lasers]] are predominant due to their ability to produce high-power light beams with short pulse durations. This yields short [[shutter speed|exposure times]] for each frame. [[Nd:YAG laser]]s, commonly used in PIV setups, emit primarily at 1064 nm wavelength and its [[harmonics]] (532, 266, etc.) For safety reasons, the laser emission is typically [[Band-pass filter|bandpass filtered]] to isolate the 532 nm harmonics (this is green light, the only harmonic able to be seen by the naked eye). A [[fiber optic cable]] or liquid light guide might be used to direct the laser light to the experimental setup.
| |
| | |
| The optics consist of a [[spherical lens]] and [[cylindrical lens]] combination. The cylindrical lens expands the laser into a plane while the spherical lens compresses the plane into a thin sheet. This is critical as the PIV technique cannot generally measure motion normal to the laser sheet and so ideally this is eliminated by maintaining an entirely 2-dimensional laser sheet. It should be noted though that the spherical lens cannot compress the laser sheet into an actual 2-dimensional plane. The minimum thickness is on the order of the [[wavelength]] of the laser light and occurs at a finite distance from the optics setup (the focal point of the spherical lens). This is the ideal location to place the analysis area of the experiment.
| |
| | |
| The correct lens for the camera should also be selected to properly focus on and visualize the particles within the investigation area.
| |
| | |
| ===Synchronizer===
| |
| The synchronizer acts as an external trigger for both the camera(s) and the laser. While analogue systems in the form of a [[Photoresistors|photosensor]], rotating [[aperture]] and a light source have been used in the past, most systems in use today are digital. Controlled by a computer, the synchronizer can dictate the timing of each frame of the CCD camera's sequence in conjunction with the firing of the laser to within 1 ns precision. Thus the time between each pulse of the laser and the placement of the laser shot in reference to the camera's timing can be accurately controlled. Knowledge of this timing is critical as it is needed to determine the velocity of the fluid in the PIV analysis. Stand-alone electronic synchronizers, called [[digital delay generators]], offer variable resolution timing from as low as 250 ps to as high as several ms. With up to eight channels of synchronized timing, they offer the means to control several flash lamps and Q-switches as well as provide for multiple camera exposures.
| |
| | |
| ==Analysis==
| |
| [[File:PIVlab multipass.jpg|thumb|PIV-Analysis of a vortex pair. The magnification in the upper left shows the increase in spatial resolution that can be achieved using a modern multi-pass window deformation technique.]]
| |
| The frames are split into a large number of interrogation areas, or windows. It is then possible to calculate a [[displacement (vector)|displacement]] [[vector (geometric)|vector]] for each window with help of [[signal processing]] and [[autocorrelation]] or [[cross-correlation]] techniques. This is converted to a velocity using the time between laser shots and the physical size of each pixel on the camera. The size of the interrogation window should be chosen to have at least 6 particles per window on average. A visual example of PIV Analysis can be seen [http://demo.interactiveflows.com/analyze/ here.]
| |
| | |
| The synchronizer controls the timing between image exposures and also permits image pairs to be acquired at various times along the flow. For accurate PIV analysis, it is ideal that the region of the flow that is of interest should display an average particle displacement of about 8 pixels. This is a compromise between a longer time spacing which would allow the particles to travel further between frames, making it harder to identify which interrogation window traveled to which point, and a shorter time spacing, which could make it overly difficult to identify any displacement within the flow.
| |
| | |
| The scattered light from each particle should be in the region of 2 to 4 pixels across on the image. If too large an area is recorded, particle image size drops and peak locking might occur with loss of sub pixel precision. There are methods to overcome the peak locking effect, but they require some additional work.
| |
| | |
| [[File:PIV analysis of a stalled flat plate.jpg|thumb|PIV analysis of a stalled flat plate, shear rate superimposed]]
| |
| If there is in house PIV expertise and time to develop a system, even though it is not trivial, it is possible to build a custom PIV system. Research grade PIV systems do, however, have high power lasers and high end camera specifications for being able to take measurements with the broadest spectrum of experiments required in research. If, for example, you want to spend less money, of course you get less resolution and lower frame rates. There are also PIV analysis software available in the open source community. The results can have similar or even better quality compared to the expensive commercial PIV systems. Commercial timing electronics come in varying resolutions. A typical example is Berkeley Nucleonics.<ref>[http://www.digitaldelaygenerators.com :::..BNC | Berkeley Nucleonics Corporation - Manufacturer of Pulse Generators, Digital Delay Generators, Function Generators, Nuclear Spectroscopy Systems, Radiation Detection...<!-- Bot generated title -->]</ref> Some of the major commercial PIV companies include TSI,<ref name="Httpwwwtsicomenindexaspx" /> LaVision<ref name="Httpwwwlavisionde" /> and Dantec.<ref name="Httpwwwdantecdynamicscom" />
| |
| | |
| ==Pros/cons==
| |
| ===Advantages===
| |
| The method is, to a large degree, nonintrusive. The added tracers (if they are properly chosen) generally cause negligible distortion of the fluid flow.<ref>
| |
| {{cite journal
| |
| |last=Melling |first=A.
| |
| |year=1997
| |
| |title=Tracer particles and seeding for particle image velocimetry
| |
| |journal=[[Measurement Science and Technology]]
| |
| |volume=8 |issue=12 |pages=1406
| |
| |doi=10.1088/0957-0233/8/12/005
| |
| |bibcode = 1997MeScT...8.1406M }}</ref>
| |
| | |
| Optical measurement avoids the need for [[Pitot tube]]s, hotwire [[anemometers]] or other intrusive [[Flow measurement]] probes. The method is capable of measuring an entire two-[[dimension]]al [[cross section (geometry)]] of the flow field simultaneously.
| |
| | |
| High speed [[data processing]] allows the generation of large numbers of image pairs which, on a [[personal computer]] may be analysed in [[Real-time computing|real time]] or at a later time, and a high quantity of near-continuous information may be gained.
| |
| | |
| Sub [[pixel]] displacement values allow a high degree of accuracy, since each vector is the statistical average for many particles within a particular tile. Displacement can typically be accurate down to 10% of one pixel on the image plane.
| |
| | |
| ===Drawbacks===
| |
| In some cases the particles will, due to their higher density, not perfectly follow the motion of the fluid ([[gas]]/[[liquid]]). If experiments are done e.g. in water, it is easily possible to find very cheap particles (e.g. plastic powder with a diameter of ~60 µm) with the same density as water. If the density still does not fit, the density of the fluid can be tuned by increasing/ decreasing its temperature. This leads to slight changes in the Reynolds number, so the fluid velocity or the size of the experimental object has to be changed to account for this.
| |
| | |
| Particle image velocimetry methods will in general not be able to measure components along the z-axis (towards to/away from the camera). These components might not only be missed, they might also introduce an interference in the data for the x/y-components caused by parallax. These problems do not exist in Stereoscopic PIV, which uses two cameras to measure all three velocity components.
| |
| | |
| Since the resulting velocity vectors are based on cross-correlating the intensity distributions over small areas of the flow, the resulting velocity field is a spatially averaged representation of the actual velocity field. This obviously has consequences for the accuracy of spatial derivatives of the velocity field, vorticity, and spatial [[correlation function]]s that are often derived from PIV velocity fields.
| |
| | |
| Commercial research grade PIV systems include a Class IV laser and high resolution/speed digital camera that make the systems potentially unsafe and very expensive. Commercial systems are prohibitively expensive (at least US$100K).
| |
| | |
| ==More complex PIV setups==
| |
| ===Stereoscopic PIV===
| |
| [[Stereoscopic]] PIV utilises two cameras with separate [[angle|viewing angle]]s to extract the z-axis displacement. Both cameras must be focused on the same spot in the flow and must be properly calibrated to have the same point in focus.
| |
| | |
| In fundamental fluid mechanics, displacement within a unit time in the X, Y and Z directions are commonly defined by the variables U, V and W. As was previously described, basic PIV extracts the U and V displacements as functions of the in-plane X and Y directions. This enables calculations of the <math>U_x</math>, <math>V_y</math>, <math>U_y</math> and <math>V_x</math> velocity gradients. However, the other 5 terms of the velocity gradient tensor are unable to be found from this information. The stereoscopic PIV analysis also grants the Z-axis displacement component, W, within that plane. Not only does this grant the Z-axis velocity of the fluid at the plane of interest, but two more velocity gradient terms can be determined: <math>W_x</math> and <math>W_y</math>. The velocity gradient components <math>U_z</math>, <math>V_z</math>, and <math>W_z</math> can not be determined.
| |
| The velocity gradient components form the tensor:
| |
| | |
| :<math>
| |
| \begin{bmatrix}
| |
| U_x & U_y & U_z \\
| |
| V_x & V_y & V_z \\
| |
| W_x & W_y & W_z \\
| |
| \end{bmatrix}
| |
| </math>
| |
| | |
| ===Dual plane stereoscopic PIV===
| |
| This is an expansion of stereoscopic PIV by adding a second plane of investigation directly offset from the first one. Four cameras are required for this analysis. The two planes of laser light are created by splitting the laser emission with a beam splitter into two beams. Each beam is then polarized orthogonally with respect to one another. Next, they are transmitted through a set of optics and used to illuminate one of the two planes simultaneously.
| |
| | |
| The four cameras are paired into groups of two. Each pair focuses on one of the laser sheets in the same manner as single-plane stereoscopic PIV. Each of the four cameras has a polarizing filter designed to only let pass the polarized scattered light from the respective planes of interest. This essentially creates a system by which two separate stereoscopic PIV analysis setups are run simultaneously with only a minimal separation distance between the planes of interest.
| |
| | |
| This technique allows the determination of the three velocity gradient components single-plane stereoscopic PIV could not calculate: <math>U_z</math>, <math>V_z</math>, and <math>W_z</math>. With this technique, the entire velocity gradient tensor of the fluid at the 2-dimensional plane of interest can be quantified. A difficulty arises in that the laser sheets should be maintained close enough together so as to approximate a two-dimensional plane, yet offset enough that meaningful velocity gradients can be found in the z-direction.
| |
| | |
| ===Micro PIV===
| |
| With the use of an epifluorescent microscope, microscopic flows can be analyzed. MicroPIV makes use of fluorescing particles that excite at a specific wavelength and emit at another wavelength. Laser light is reflected through a dichroic mirror, travels through an objective lens that focuses on the point of interest, and illuminates a regional volume. The emission from the particles, along with reflected laser light, shines back through the objective, the dichroic mirror and through an emission filter that blocks the laser light. Where PIV draws its 2-dimensional analysis properties from the planar nature of the laser sheet, microPIV utilizes the ability of the objective lens to focus on only one plane at a time, thus creating a 2-dimensional plane of viewable particles.<ref name=Nguyen>{{cite book | author=Nnguyen and Wereley | title=Fundamentals of Microfluidics}}</ref><ref name=Kirby>{{cite book | author=Kirby, B.J. | title=Micro- and Nanoscale Fluid Mechanics: Transport in Microfluidic Devices.| url=http://www.kirbyresearch.com/textbook| year=2010| publisher=Cambridge University Press| isbn=978-0-521-11903-0}}</ref>
| |
| | |
| MicroPIV particles are on the order of several hundred nm in diameter, meaning they are extremely susceptible to Brownian motion. Thus, a special ensemble averaging analysis technique must be utilized for this technique. The cross-correlation of a series of basic PIV analyses are averaged together to determine the actual velocity field. Thus, only steady flows can be investigated. Special preprocessing techniques must also be utilized since the images tend to have a zero-displacement bias from background noise and low signal-noise ratios. Usually, high numerical aperture objectives are also used to capture the maximum emission light possible. Optic choice is also critical for the same reasons.
| |
| | |
| ===Holographic PIV===
| |
| Holographic PIV (HPIV) encompasses a variety of experimental techniques which use the interference of coherent light scattered by a particle and a reference beam to encode information of the amplitude and phase of the scattered light incident on a sensor plane. This encoded information, known as a [[hologram]], can then be used to reconstruct the original intensity field by illuminating the hologram with the original reference beam via optical methods or digital approximations. The intensity field is interrogated using 3-D cross-correlation techniques to yield a velocity field.
| |
| | |
| Off-axis HPIV uses separate beams to provide the object and reference waves. This setup is used to avoid speckle noise form being generated from interference of the two waves within the scattering medium, which would occur if they were both propagated through the medium. An off-axis experiment is a highly complex optical system comprising numerous optical elements, and the reader is referred to an example schematic in Sheng et al.<ref name=sheng_2008>J. Sheng, E. Malkiel, and J. Katz, "Using digital holographic microscopy for simultaneous measurements of 3D near wall velocity and wall shear stress in a turbulent boundary layer," Experiments in Fluids, vol. 45, pp. 1023-1035, 2008.</ref> for a more complete presentation.
| |
| | |
| In-line holography is another approach that provides some unique advantages for particle imaging. Perhaps the largest of these is the use of forward scattered light, which is orders of magnitude brighter than scattering oriented normal to the beam direction. Additionally, the optical setup of such systems is much simpler because the residual light does not need to be separated and recombined at a different location. The in-line configuration also provides a relatively easy extension to apply CCD sensors, creating a separate class of experiments known as digital in-line holography. The complexity of such setups shifts from the optical setup to image post-processing, which involves the use of simulated reference beams. Further discussion of these topics is beyond the scope of this article and is treated in Arroyo and Hinsch<ref>M. P. Arroyo and K. D. Hinsch, "Recent Developments of PIV towards 3D Measurements, pp. 127-154, Springer, 2008.</ref>
| |
| | |
| A variety of issues degrade the quality of HPIV results. The first class of issues involves the reconstruction itself. In holography, the object wave of a particle is typically assumed to be spherical; however, due to Mie scattering theory, this wave is a complex shape which can distort the reconstructed particle. Another issue is the presence of substantial speckle noise which lowers the overall signal-to-noise ratio of particle images. This effect is of greater concern for in-line holographic systems because the reference beam is propagated through the volume along with the scattered object beam. Noise can also be introduced through impurities in the scattering medium, such as temperature variations and window blemishes. Because holography requires coherent imaging, these effects are much more severe than traditional imaging conditions. The combination of these factors increases the complexity of the correlation process. In particular, the speckle noise in an HPIV recording often prevents traditional image-based correlation methods from being used. Instead, single particle identification and correlation are implemented, which set limits on particle number density. A more comprehensive outline of these error sources is given in Meng et al.<ref>H. Meng, G. Pan, Y. Pu, and S. H. Woodward, “Holographic particle image velocimetry: from film to digital recording,” Measurement Science and Technology, vol. 15, pp. 673–685, 2004.</ref>
| |
| | |
| In light of these issues, it may seem that HPIV is too complicated and error-prone to be used for flow measurements. However, many impressive results have been obtained with all holographic approaches. Svizher and Cohen<ref>A. Svizher and J. Cohen, “Holographic particle image velocimetry system for measurement of hairpin vortices in air channel flow,” Experiments in Fluids, vol. 40, pp. 708–722, 2006.</ref> used a hybrid HPIV system to study the physics of hairpin vortices. Tao et al.<ref>B. Tao, J. Katz, and C. Meneveau, “Geometry and scale relationships in high reynolds number turbulence determined from three-dimensional holographic velocimetry,” Physics of Fluids, vol. 12, pp. 941–944, 2000.</ref> investigated the alignment of vorticity and strain rate tensors in high Reynolds number turbulence. As a final example, Sheng et al.<ref name=sheng_2008 /> used holographic microscopy to perform near-wall measurements of turbulent shear stress and velocity in turbulent boundary layers.
| |
| | |
| ===Scanning PIV===
| |
| By using a rotating mirror, a high-speed camera and correcting for geometric changes, PIV can be performed nearly instantly on a set of planes throughout the flow field. Fluid properties between the planes can then be interpolated. Thus, a quasi-volumetric analysis can be performed on a target volume. Scanning PIV can be performed in conjunction with the other 2-dimensional PIV methods described to approximate a 3-dimensional volumetric analysis.
| |
| | |
| ===Tomographic PIV===
| |
| Tomographic PIV is based on the illumination, recording, and reconstruction of tracer particles within a 3-D measurement volume. The technique uses several cameras to record simultaneous views of the illuminated volume, which is then reconstructed to yield a discretized 3-D intensity field. A pair of intensity fields are analyzed using 3-D cross-correlation algorithms to calculate the 3-D, 3-C velocity field within the volume. The technique was originally developed by Elsinga et al.<ref name=elsinga_2006>G. E. Elsinga, F. Scarano, B. Wieneke, and B. W. van Oudheusden, "Tomographic particle image velocimetry," Experiments in Fluids, vol. 41, pp. 933-947, 2006.</ref> in 2006 and has since grown and is the focus of intense research into improvements and applications of the technique.
| |
| | |
| The reconstruction procedure is a complex under-determined inverse problem. The primary complication is that a single set of views can result from a large number of 3-D volumes. Procedures to properly determine the unique volume from a set of views are the foundation for the field of tomography. In most Tomo-PIV experiments, the multiplicative algebraic reconstruction technique (MART) is used. The advantage of this pixel-by-pixel reconstruction technique is that it avoids the need to identify individual particles.
| |
| | |
| In Elsinga et al.,<ref name=elsinga_2006/> a parameteric study was performed where parameters such as number of MART iterations, number of cameras, viewing directions, particle image density, calibration accuracy, and image noise were varied. As a rule of thumb, at least four cameras are needed for acceptable reconstruction accuracy, and the cameras should be placed at approximately 30 degrees normal to the measurement volume. Many additional factors are necessary to consider for a successful experiment, and the reader is encouraged to explore recent literature for more detail.
| |
| | |
| Tomo-PIV has been applied perhaps to a broader range of flows than any other 3-D velocimetry technique. Examples include the structure of a turbulent boundary layer/shock wave interaction,<ref>R. A. Humble, G. E. Elsinga, F. Scarano, and B. W. van Oudheusden, "Three-dimensional instantaneous structure of a shock wave/turbulent boundary layer interaction," Journal of Fluid Mechanics, vol. 622, pp. 33-62, 2009.</ref> the vorticity of a cylinder wake,<ref>F. Scarano and C. Poelma, "Three-dimensional vorticity patterns of cylinder wakes," Experiments in Fluids, vol. 47, pp. 69-83, 2009.</ref> and for rod-airfoil aeroacoustic experiments.<ref>D. Violato, P. Moore, and F. Scarano, "Lagrangian and Eulerian pressure field evaluation of rod-airfoil flow from time-resolved tomographic PIV," Experiments in Fluids, 2010</ref> The technique is continuing to mature and will likely be used to an increasing degree in future fluid dynamics experiments.
| |
| | |
| ===Thermographic PIV===
| |
| Thermographic PIV is based on the use of thermographic phosphors as seeding particles. The use of these thermographic phosphors permits simultaneous measurement of velocity and temperature in a flow.
| |
| | |
| Thermographic phosphors consist of ceramic host materials doped with rare-earth or transition metal ions, which exhibit phosphorescence when they are illuminated with UV-light. The decay time and the spectra of this phosphorescence are temperature sensitive and offer two different methods to measure temperature. The decay time method consists on the fitting of the phosphorescence decay to an exponential function and is normally used in point measurements, although it has been demonstrated in surface measurements. The intensity ratio between two different spectral lines of the phosphorescence emission, tracked using spectral filters, is also temperature-dependent and can be employed for surface measurements.
| |
| | |
| The micrometre-sized phosphor particles used in thermographic PIV are seeded into the flow as a tracer and, after illumination with a thin laser light sheet, the temperature of the particles can be measured from the phosphorescence, normally using an intensity ratio technique. It is important that the particles are of small size so that not only they follow the flow satisfactorily but also they rapidly assume its temperature. For a diameter of 2 µm, the thermal slip between particle and gas is as small as the velocity slip.
| |
| | |
| Illumination of the phosphor is achieved using UV light. Most thermographic phosphors absorb light in a broad band in the UV and therefore can be excited using a YAG:Nd laser. Theoretically, the same light can be used both for PIV and temperature measurements, but this would mean that UV-sensitive cameras are needed. In practice, two different beams originated in separate lasers are overlapped. While one of the beams is used for velocity measurements, the other is used to measure the temperature.
| |
| | |
| The use of thermographic phosphors offers some advantageous features including ability to survive in reactive and high temperature environments, chemical stability and insensitivity of their phosphorescence emission to pressure and gas composition. In addition, thermographic phosphors emit light at different wavelengths, allowing spectral discrimination against excitation light and background.
| |
| | |
| Thermographic PIV has been demonstrated for time averaged
| |
| <ref>
| |
| {{cite journal
| |
| |last=Omrane |first=A. |last2=Petersson |first2=P. |last3=Aldén |first3=M. |last4=Linne |first4=M.A.
| |
| |year=2008
| |
| |title=Simultaneous 2D flow velocity and gas temperature measurements using thermographic phosphors
| |
| |journal=[[Applied Physics B-Lasers and optics]]
| |
| |volume=92 |issue=1 |pages=99–102
| |
| }}</ref>
| |
| and single shot
| |
| <ref>
| |
| {{cite journal
| |
| |last=Fond |first=B. |last2=Abram |first2=C. |last3=Heyes |first3=A.L. |last4=Kempf |first4=A.M. |last5=Beyrau |first5=F.
| |
| |year=2012
| |
| |title=Simultaneous temperature, mixture fraction and velocity imaging in turbulent flows using thermographic phosphor tracer particles
| |
| |journal=[[Optics Express]]
| |
| |volume=20 |issue=20 |pages=22118–22133
| |
| }}</ref>
| |
| measurements. Recently, also time-resolved high speed (3 kHz) measurements
| |
| <ref>
| |
| {{cite journal
| |
| |last=Abram |first=C. |last2=Fond |first2=B. |last3=Heyes |first3=A.L. |last4=Beyrau |first4=F.
| |
| |year=2013
| |
| |title=High-speed planar thermometry and velocimetry using thermographic phosphor particles
| |
| |journal=[[Applied Physics B-Lasers and optics]]
| |
| |volume=111 |issue=2 |pages=155–160
| |
| }}</ref>
| |
| have been successfully performed.
| |
| | |
| ==Applications==
| |
| PIV has been applied to a wide range of flow problems, varying from the flow over an aircraft wing in a wind tunnel to vortex formation in prosthetic heart valves. 3-Dimensional techniques have been sought to analyze turbulent flow and jets.
| |
| | |
| Rudimentary PIV algorithms based on cross-correlation can be implemented in a matter of hours, while more sophisticated algorithms may require a significant investment of time. Several open source implementations are available including Fluere<ref>[http://fluere.kplynch.com/ Index of /<!-- Bot generated title -->]</ref> (Cross-platform GUI in C++), URAPIV<ref>[http://urapiv.wordpress.com URAPIV = OPEN SOURCE (Matlab or Python or C++) Particle Image Velocimetry (PIV)<!-- Bot generated title -->]</ref> and mpiv<ref>[http://sauron.urban.eng.osaka-cu.ac.jp/~mori/softwares/mpiv/ JUMP<!-- Bot generated title -->]</ref> (a MATLAB Toolbox), PyPIV<ref>[http://sourceforge.net/projects/pypiv PyPIV | Free software downloads at SourceForge.net<!-- Bot generated title -->]</ref> (an implementation in Python), JPIV<ref>[http://www.jpiv.vennemann-online.de/ JPIV Homepage<!-- Bot generated title -->]</ref> (a Java implementation), OSIV<ref>[http://osiv.sourceforge.net OSIV - Open Source Image Velocimetry<!-- Bot generated title -->]</ref> and Gpiv<ref>[http://gpiv.sourceforge.net Gpiv home page<!-- Bot generated title -->]</ref> (both implementations in C).
| |
| | |
| Application of PIV in the US education system has been limited due to high price and safety concerns of industrial research grade PIV systems. As part of the [[National Science Foundation]] (NSF) project, Educational PIV (e-PIV)<ref name="Httpwwwinteractiveflowscomdownloads" /> system is used in teaching fluid mechanics to students studying fluid mechanics in design, engineering and science including physiology.
| |
| | |
| === Granular PIV: velocity measurement in granular flows and avalanches ===
| |
| PIV can also be used to measure the velocity field of the free surface and basal boundary in a granular flows such as those in shaken containers,<ref>
| |
| {{cite journal
| |
| |last=Lueptow |first=R.M. |last2=Akonur |first2=A. |last3=Shinbrot |first3=T.
| |
| |year=2000
| |
| |title=PIV for granular flows
| |
| |journal=[[Experiments in Fluids]]
| |
| |volume=28 |issue=2 |pages=183–186
| |
| |doi=10.1007/s003480050023
| |
| }}</ref> tumblers<ref>
| |
| {{cite journal
| |
| |last=Jain |first=N. |last2=Ottino |first2=J.M. |last3=Lueptow |first3=R.M.
| |
| |year=2002
| |
| |title=An experimental study of the flowing granular layer in a rotating tumbler
| |
| |journal=[[Physics of Fluids]]
| |
| |volume=14 |issue=2 |pages=572–582
| |
| |doi=10.1063/1.1431244
| |
| |bibcode = 2002PhFl...14..572J }}</ref> and avalanches.
| |
| This analysis is particularly well-suited for nontransparent media such as sand, gravel, quartz, or other granular materials that are common in geophysics. This PIV approach is called “granular PIV.” The set-up for granular PIV differs from the usual PIV setup in that the optical surface structure which is produced by illumination of the surface of the granular flow is already sufficient to detect the motion. This means one does not need to add tracer particles in the bulk material.
| |
| | |
| ==See also==
| |
| *[[Digital image correlation]]
| |
| *[[Hot-wire anemometry]]
| |
| *[[Laser Doppler velocimetry]]
| |
| *[[Molecular tagging velocimetry]]
| |
| *[[Particle tracking velocimetry]]
| |
| | |
| ==Bibliography==
| |
| *{{cite web
| |
| |last=Westerweel |first=J.
| |
| |year=1993
| |
| |title=Digital Particle Image Velocimetry — Theory and Application''
| |
| |url=http://www.ahd.tudelft.nl/~jerry/publ/thesis.pdf
| |
| |publisher=[[Delft University Press]]
| |
| |isbn=90-6275-881-9
| |
| }}
| |
| *{{cite book
| |
| |last=Raffel |first=M. |last2=Willert |first2=C. |last3=Wereley |first3=S. |last4=Kompenhans |first4=J.
| |
| |year=2007
| |
| |title=Particle Image Velocimetry: A Practical Guide
| |
| |publisher=[[Springer-Verlag]]
| |
| |isbn=3-540-72307-2
| |
| }}
| |
| *{{cite book
| |
| |last=Adrian |first=R.J. |last2=Westerweel|first2=J.
| |
| |year=2011
| |
| |title=Particle Image Velocimetry
| |
| |publisher=[[Cambridge University Press]]
| |
| |isbn=978-0-521-44008-0
| |
| }}
| |
| | |
| ==Notes==
| |
| {{reflist|33em}}
| |
| | |
| ==References==
| |
| *{{cite journal
| |
| |last=Adrian |first=R.J.
| |
| |year=1991
| |
| |title=Particle-imaging techniques for experimental fluid mechanics
| |
| |journal=[[Annual Review of Fluid Mechanics]]
| |
| |volume=23 |issue= 1|pages=261–304
| |
| |doi=10.1146/annurev.fl.23.010191.001401
| |
| |bibcode = 1991AnRFM..23..261A }}
| |
| *{{cite journal
| |
| |last=Adrian |first=R.J.
| |
| |year=2005
| |
| |title=Twenty years of particle image velocimetry
| |
| |journal=[[Experiments in Fluids]]
| |
| |volume=39 |issue=2 |pages=159–169
| |
| |doi=10.1007/s00348-005-0991-7
| |
| |bibcode = 2005ExFl...39..159A }}
| |
| *{{cite journal
| |
| |last=Santiago |first=J. G. |last2=Wereley |first2=S. T. |last3=Meinhart |first3=C. D. |last4=Beebe |first4=D. J. |last5=Adrian |first5=R. J.
| |
| |year=1998
| |
| |title=A micro particle image velocimetry system
| |
| |journal=[[Experiments in Fluids]]
| |
| |volume=25 |issue=4 |pages=316–319
| |
| |doi=10.1007/s003480050235
| |
| }}
| |
| *{{cite journal
| |
| |last=Fouras |first=A. |last2=Dusting |first2=J. |last3=Lewis |first3=R. |last4=Hourigan |first4=K.
| |
| |year=2007
| |
| |title=Three-dimensional synchrotron x-ray particle image velocimetry
| |
| |journal=[[Journal of Applied Physics]]
| |
| |volume=102 |issue=6 |pages=064916
| |
| |doi=10.1063/1.2783978
| |
| |bibcode = 2007JAP...102f4916F }}
| |
| *{{cite journal
| |
| |last=Wereley |first=S.T. |last2=Meinhart |first2=C.D.
| |
| |year=2010
| |
| |title= Recent Advances in Micro-Particle Image Velocimetry
| |
| |journal=[[Annual Review of Fluid Mechanics]]
| |
| |volume=42 |issue= 1|pages=557–576
| |
| |doi=10.1146/annurev-fluid-121108-145427
| |
| |bibcode = 2010AnRFM..42..557W }}
| |
| | |
| ==External links==
| |
| {{External links|date=April 2012}}
| |
| *[http://www.interactiveflows.com/downloads/ Educational Particle Image Velocimetry (e-PIV) - resources and demonstrations]
| |
| *[http://www.dantecdynamics.com/Default.aspx?ID=651 "Dantec Dynamics"].
| |
| *[http://www.velocimetry.net from "Online Resource Center"].
| |
| *[http://www.holomap.com/dpiv.htm from "The Art of Laser Velocimetry"], an explanation of DPIV, and an [http://www.holomap.com/hpiv.htm explanation of holographic PIV].
| |
| *[http://www.archive.org/download/AcousticParticle-imageVelocimetry--DevelopmentAndApplications/AcousticParticle-imageVelocimetry--DevelopmentAndApplications.pdf Acoustic Particle-Image Velocimetry — Development and Applications]
| |
| *[http://fluere.kplynch.com/ Fluere] (Free software, cross-platform GUI)
| |
| *[http://www.oceanwave.jp/softwares/mpiv/ MATLAB PIV toolbox]
| |
| *[http://PIVlab.blogspot.com PIVlab: Open-source PIV software for MATLAB, PIV images/ videos etc.]
| |
| *[http://www.openpiv.net OpenPIV]
| |
| *[http://sourceforge.net/projects/qi-tools/?source=directory PRANA Open-source PIV Software]
| |
| *[http://www.gpiv.sourceforge.net Gpiv, Gpivtools, PyGpiv] (Free software, GPL)
| |
| *[http://www.jpiv.vennemann-online.de JPIV] (Free software, GPL)
| |
| *[http://www.piv.de/piv/index.php Particle Image Velocimetry - General Information and Applications]
| |
| *[http://apt.mulabs.com Able Particle Tracker - Windows software package for PIV]
| |
| *[http://www.berkeleynucleonics.com/products1.html Synchronizer electronics for PIV]
| |
| *[http://www.lavision.de/en/products/flowmaster/index.php "LaVision"]
| |
| *[http://norpix.com StreamPix 5 DVR software]
| |
| *[http://microspheres.us/fluorescent-microspheres/piv-seeding-microparticle-flow-visualization/599.html "PIV seeding - Microparticle recommendations"]
| |
| | |
| {{DEFAULTSORT:Particle Image Velocimetry}}
| |
| [[Category:Measurement]]
| |
| [[Category:Fluid dynamics]]
| |