File:Spur Gear 12mm, 18t.svg

From formulasearchengine
Jump to navigation Jump to search
Original file (SVG file, nominally 400 × 350 pixels, file size: 28 KB)

This file is from Wikimedia Commons and may be used by other projects. The description on its file description page there is shown below.

Summary

Description A line drawing of a spur gear with an involute profile. This was drawn in Solid Edge and Inkscape using Unwin's Construction. The pitch diameter is 12mm and there are 18 teeth, giving a module of 2/3.
Date
Source Self-made
W3CiThe source code of this SVG is valid.
 This vector image was created with Inkscape by v .
Author Inductiveload
Permission
(Reusing this file)
Public domain I, the copyright holder of this work, release this work into the public domain. This applies worldwide.
In some countries this may not be legally possible; if so:
I grant anyone the right to use this work for any purpose, without any conditions, unless such conditions are required by law.

Captions

Add a one-line explanation of what this file represents

Items portrayed in this file

depicts

inception

25 August 2007

media type

image/svg+xml

data size

28,770 byte

checksum

1cfd5616e558898879af3606e99db94db2a139b8

determination method or standard: SHA-1

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current00:28, 26 August 2007Thumbnail for version as of 00:28, 26 August 2007400 × 350 (28 KB)wikimediacommons>Inductiveload{{Information |Description=A line drawing of a w:spur gear with an w:involute profile. This was drawn in Solid Edge and Inkscape using Unwin's Construction. The pitch diameter is 12mm and there are 18 teeth, giving a module of 2/3. |Source=S

There are no pages that use this file.

Retrieved from "https://en.formulasearchengine.com/wiki/File:Spur_Gear_12mm,_18t.svg"